Advantages:
AQUAFILTER's water dispensers (also known as Coolers) are perfect solution for the
problem of bad water in offices, hospitals, schools, etc. Unlike the bottled systems our dispensers provide fresh water all the time using reverse osmosis filtration technology.
Reverse Osmosis (RO) is a water purification process that removes organic contaminants, dissolved solids, heavy metals and bacteria from water by utilizing the Thin Film Composite (TFC) Membrane Technology.
Contaminants in water cannot get through the membrane, and are drained away as
wastewater. This is one of the most effective technologies known today for the
purification of drinking water.
Our water dispensers are equipped in four stage reverse osmosis system, where every
stage has it's own function for better filtration process.
The First Stage is a 5-micron Polypropylene Spun sediment filter. It removes sand,
silt, rust and other mechanical impurities. Second Stage is a filter with Activated Carbon cartridge made of granulated coconut shell carbon. It removes chlorine and organic contaminants. Reverse Osmosis Membrane (Third Stage) removes 99.8% of all dissolved in water solids, as well as bacteria, fungi and Protozoan Cysts. The Membrane provides up to 75GPD (Gallons per Day) of clean water. The Forth Stage is a post filtration Activated Carbon filter removing traces of dissolved gases, which may have an impact on the taste of the water.
Electronic temperature regulator controls hot (85 - 100oC) and cold (4 - 12oC) water.
Features:
- Automatic hot / cold water temperature control
- Touch type power switches
- IC re-heating function
- Automatic heating shut-off when hot water tank is empty
- Non-freon high-tech electric chilling device in cooling system
- Large 8-liter reservoir with water level indicator.
- Reservoir made of easy to clean, FDA approved material
- 2.5 liter hot tank made of SUS304 stainless steel
| Filtration Stages |
Four |
| Fittings |
JACO |
| Membrane |
TFC (75 GPD) |
| Capacity |
up to 75 GPD |
| Minimal discharge |
> 92% |
| Min./Max. Pressure |
2,8 - 6,0 bar |
| Water temperature |
2 - 40oC |
| Cooling system |
Non-freon |
| Power consumption - hot water |
700W |
| Power consumption - cold water |
100W |
| Hot water temperature |
85oC - 100oC |
| Cold water temperature |
4oC - 12oC |
| First Stage |
5-micron (Polypropylen Spun) |
| Second Stage |
10-micron (Activated Carbon) |
| Post-Filtration |
Granulated Activated Carbon |
| Cold water tank |
2,5 liters |
| Hot water tank |
4 liters |
| Room temperature water tank |
8 liters |
| Dimensions |
320mm x 400mm x 1040mm |
| Weight |
17kg |
|

Inside of the water dispenser
|
|